In computer science, an integer is a datum of integral data type, a data type which represents some finite subset of the mathematical integers. Integral data types may be of different sizes and may or may not be allowed to contain negative values.^[1] Integers are represented in a computer as a group of binary digits. The size of the grouping varies but computer hardware nearly always provides a way to represent a processor register, or memory address as an integer; the set of integer sizes available varies between different types of computers.

Value and representation

The value of an item with an integral type is the mathematical integer that it corresponds to. Integral types may be unsigned (capable of representing only non-negative integers) or signed (capable of representing negative integers as well).^[2]

An integer value is typically specified in the (source code of the) program as a sequence of digits, without spaces or thousands separators, optionally prefixed with + or −. Some programming languages allow other notations, such as hexadecimal (base 16) or octal (base 8).

The internal representation of this datum is the way the value is stored in the computer’s memory. Unlike mathematical integers, a typical datum in a computer has some minimal and maximum possible value. Typically all integers from the minimum through the maximum can be represented.

The maximum is sometimes called MAXINT or—as in the C standard library limits.h header—INT_MAX.^[3]

The most common representation of a positive integer is a string of bits, using the binary numeral system. The order of the memory bytes storing the bits varies; see endianness. The width or precision of an integral type is the number of bits in its representation. An integral type with n bits can encode 2ⁿ numbers; for example an unsigned type typically represents the non-negative values 0 through 2ⁿ−1.

There are four different ways to represent negative numbers in a binary numeral system. The most common is two’s complement, which allows a signed integral type with n bits to represent numbers from −2⁽ⁿ⁻¹⁾ through 2⁽ⁿ⁻¹⁾−1. Two’s complement arithmetic is convenient because there is a perfect one-to-one correspondence between representations and values (in particular, no separate +0 and −0), and because addition, subtraction and multiplication do not need to distinguish between signed and unsigned types. The other possibilities are offset binary, sign-magnitude and ones' complement. See Signed number representations for details.

Common integral data types

Different CPUs support different integral data types. Typically, hardware will support both signed and unsigned types but only a small, fixed set of widths.

The table above lists integral type widths that are supported in hardware by common processors. High level programming languages provide more possibilities. It is common to have a ‘double width’ integral type that has twice as many bits as the biggest hardware-supported type. Many languages also have bit-field types (a specified number of bits, usually constrained to be less than the maximum hardware-supported width) and range types (which can represent only the integers in a specified range).

Some languages, such as Lisp, Smalltalk, REXX and Haskell, support arbitrary precision integers (also known as infinite precision integers or bignums). Other languages which do not support this concept as a top-level construct may have libraries available to represent very large numbers using arrays of smaller variables, such as Java's BigInteger class or Perl's "bigint" package.^[10] These use as much of the computer’s memory as is necessary to store the numbers; however, a computer has only a finite amount of storage, so they too can only represent a finite subset of the mathematical integers. These schemes support very large numbers, for example one kilobyte of memory could be used to store numbers up to 2466 decimal digits long.

A Boolean or Flag type is a type which can represent only two values: 0 and 1, usually identified with false and true respectively. This type can be stored in memory using a single bit, but is often given a full byte for convenience of addressing and speed of access.

A four-bit quantity is known as a nibble (when eating, being smaller than a bite) or nybble (being a pun on the form of the word byte). One nibble corresponds to one digit in hexadecimal and holds one digit or a sign code in binary-coded decimal.

Bytes and octets

The term byte initially meant ‘the smallest addressable unit of memory’. In the past, 5-, 6-, 7-, 8-, and 9-bit bytes have all been used. There have also been computers that could address individual bits (‘bit-addressed machine’), or that could only address 16- or 32-bit quantities (‘word-addressed machine’). The term byte was usually not used at all in connection with bit- and word-addressed machines.

The term octet always refers to an 8-bit quantity. It is mostly used in the field of computer networking, where computers with different byte widths might have to communicate.

In modern usage byte almost invariably means eight bits, since all other sizes have fallen into disuse; thus byte has come to be synonymous with octet.

Words

The term 'word' is used for a small group of bits which are handled simultaneously by processors of a particular architecture. The size of a word is thus CPU-specific. Many different word sizes have been used, including 6-, 8-, 12-, 16-, 18-, 24-, 32-, 36-, 39-, 48-, 60-, and 64-bit. Since it is architectural, the size of a word is usually set by the first CPU in a family, rather than the characteristics of a later compatible CPU. The meanings of terms derived from word, such as longword, doubleword, quadword, and halfword, also vary with the CPU and OS.^[7]

Practically all new desktop processors are capable of using 64-bit words, though embedded processors with 8- and 16-bit word size are still common. The 36-bit word length was common in the early days of computers.

One important cause of non-portability of software is the incorrect assumption that all computers have the same word size as the computer used by the programmer. For example, if a programmer using the C language incorrectly declares as int a variable that will be used to store values greater than 2¹⁶−1, the program will fail on computers with 16-bit integers. That variable should have been declared as long, which has at least 32 bits on any computer. Programmers may also incorrectly assume that a pointer can be converted to an integer without loss of information, which may work on (some) 32-bit computers, but fail on 64-bit computers with 64-bit pointers and 32-bit integers.

Short integer

A short integer can represent a whole number which may take less storage, while having a smaller range, compared with a standard integer on the same machine.

A short integer in one programming language may be a different size in a different language or on a different processor. In some languages this size is fixed across platforms, while in others it is machine-dependent. In some languages this datatype does not exist at all.

In C, it is denoted by short. It is required to be at least 16 bits, and is often smaller than a standard integer, but this is not required.^[9][8] A conforming program can assume that it can safely store values between −(2¹⁵−1) and 2¹⁵−1, but it may not assume that the range isn't larger. In Java, a short is always a 16-bit integer. In the Windows API, the datatype SHORT is defined as a 16-bit signed integer on all machines.^[7]

Common short integer sizes

Long integer

A long integer can represent a whole integer number whose range is greater than or equal to that of a standard integer on the same machine.

A long integer in one programming language may be different in size from a long integer in a different language or processor. In some languages this size is fixed across platforms, while in others it is machine dependent. In some languages this data type does not exist at all.

A long integer commonly requires double the storage capacity of a standard integer, although this is not always the case.

C and C++

In the C99 version of the C programming language and the C++11 version of C++, a long long type is supported that doubles the minimum capacity of the standard long to 64 bits. This type is not supported by compilers that require C code to be compliant with the previous C++ standard, C++03, because the long long type did not exist in C++03. For an ANSI/ISO compliant compiler the minimum requirements for the specified ranges, that is −(2³¹) to 2³¹−1 for signed and 0 to 2³²−1 for unsigned, must be fulfilled; however, extending this range is permitted.^{[11] [12]} This can be an issue when exchanging code and data between platforms, or doing direct hardware access. Thus, there are several sets of headers providing platform independent exact width types. The C standard library provides stdint.h; this was introduced in C99 and C++11.

Common long integer sizes

^† the term long int is equivalent but it is used rarely^{[citation needed]}

See also

• Signed number representations
• Binary-coded decimal, another, rather different, representation for integers which is still commonly used in mainframe financial applications and in databases.

Notes